Connecting devices

Step 3: Connect non-IP telephones and trunks

Connecting a DCP telephone

This section explains how to connect a DCP telephone.

! WARNING:

The ports on the DCP media modules are intended for in-building use only. Phone lines connected to these ports are not to be routed out-of-building. Failure to comply with this could cause harm to personnel and equipment.

To connect a DCP telephone:

1Wire a telephone port to a DCP port on the G350. The following media modules provide DCP telephone ports:

MM312 — 24 DCP ports.

MM712 — 8 DCP ports.

2Plug the DCP telephone into the telephone port.

Figure 10: The MM312 media module

Figure 11: The MM712 media module

46

Installation of the G350 Media Gateway

 

December 2003

Page 46
Image 46
Avaya G350 manual Connecting a DCP telephone, To connect a DCP telephone