Installing the Avaya G350 Media Gateway

Step 4: Connect power to the G350

Step 4: Connect power to the G350

After you have mounted the G350, installed the media modules, and attached grounding conductors, you can connect power to the G350.

To connect power to the G350:

1Connect the power cable to the power connector on the G350 back panel.

2Plug the power cable into a mains socket. The G350 is now powered. The PWR LED on the front panel lights. The CPU LED lights up if the firmware is running. At least one LED on each media module lights up initially and then goes off after about 20 seconds.

Installation of the G350 Media Gateway

31

December 2003

 

Page 31
Image 31
Avaya manual Connect power to the G350, To connect power to the G350