Avocent Cyclades-PR4000 installation manual Parameter Description

Cyclades-PR4000

Authentication Menu CONFIG =>INTERFACE =>T1/E1=><CHANNEL> =>AUTHENTICATION

Parameter	Description
Authentication Type	Local uses the list of users defined in CONFIG=> SECURITY=>USERS=>ADD.
	Server uses either Radius or Tacacs to authenticate the user.
	Remote is when this interface is considered to be the user and the other end of the
	connection performs the authentication
Username	Applies when Authentication Type is Remote. The username the remote device expects
	to receive.
Password	Applies when Authentication Type is Remote. The password the remote device expects
	to receive.
Authentication	Applies when Authentication Type is Server. Indicates that either a Radius or Tacacs
Server	server is used for validation. The location and other parameters of the server must be
	configured in CONFIG=> SECURITY. See section 4.3.
Authentication	Applies when Authentication Type is Local or Server. Either PAP or CHAP or both can
Protocol	be used for authentication.

Wizards were created to simplify the E1/T1 configuration for common applications. The Wizards Menu tree is shown in Figure 8.10, and its parameters are explained in the next table. The parameters set automatically are given in the tables that follow.

Chapter 8 - The E1 and T1 Interfaces, With Signaling 70