Avocent Cyclades-PR4000 installation manual Network Protocols

Cyclades-PR4000

CHAPTER 9 NETWORK PROTOCOLS

The second step in most interface configurations is to choose which network protocol to use and assign values to the relevant parameters. At least one of IP, Transparent Bridge, or IPX (optional, and discussed in chapter 15) must be activated. Use the information provided below to set the parameters for each interface. The Ethernet network protocol menu includes IP bridging and is explained in chapter 5. The SWAN Network Protocol Menu is given in figure 7.1. Note that this menu varies slightly for each interface. Specific information on the options for each interface is provided in the CyROS Reference Guide in the chapter for the interface.

Config

Interface	SWAN	Network Protocol	IP	Active
				Interface Unnumbered/Numbered
				Assign IP from Interface
				Primary IP address
				Subnet Mask
				Secondary IP Address
				Subnet Mask
				IP MTU
				NAT
				ICMP Port
				Incoming Rule List Name
				Detailed Incoming IP Accounting
				Outgoing Rule List Name
				Detailed Outgoing IP Accounting
				Routing of Broadcast Messages
			Transparent	Status
			Bridge	Port Priority
				Incoming Rule List Name
				Outgoing Rule List Name

FIGURE 7.1 NETWORK PROTOCOL MENU TREE FOR THE SWAN INTERFACE

Chapter 9 Network Protocols 75