Cyclades-PR4000

 

 

Router 2

Unnumbered

Slot 3

192.168.100.1

Interfaces

ETH0

 

 

 

Slot 1

Router 1

10.0.0.3

F

 

 

 

 

ETH0

 

 

E

Network 3

B

ANetwork 1

FIGURE 12.2 STATIC ROUTING EXAMPLE 2

Figure 12.2 shows another static routing example to explain the Gateway or Interface parameter. Between the two routers is a point-to-point connection. Another network could be created, but is not necessary. Both routers can be assigned unnumbered interfaces, because everything that leaves one router is sent to the other.

To define static routes, enter the menu CONFIG =>STATIC ROUTES =>IP =>ADD ROUTE. A description of the parameters in this menu, with the configuration for Router 1 in the examples above, is given in the table that follows.

Chapter 11 - Routing Protocols

93

Page 93
Image 93
Avocent Cyclades-PR4000 installation manual Unnumbered, Interfaces