Avocent Cyclades-PR4000 installation manual Operator Start

Cyclades-PR4000

The configured rules will appear as shown in the following listing.

Note that for this type of traffic control, of the traffic-specific parameters only Flow Priority is used. The Reserved Bandwidth and Bandwidth Priority parameters are not important. A system needing all three is conceivable, but much too complicated to show in this manual.

Rules Lists
Rule List	Rule	Default	List	Linked
Name
	Status	Scope	Type	Rule
				List
web_access	Enabled		Traffic
Filter_list Name web_access
Rule 0				Rule 1
Status		Enabled		Status	Enabled
Flow priority		1		Flow Priority	2
Rule bandwidth		0%		Rule bandwidth	0%
Bandwidth priority		0		Bandwidth priority	0
Protocol		TCP		Protocol	TCP
Source IP Operator		None		Source IP Operator	None
Destination IP		None		Destination IP	None
Operator				Operator
Source Port Operator		Equal		Source Port Operator	None
Source Port Start		80		Destination Port	Equal
				Operator
Destination Port		None		Destination Port	SMTP
Operator				Start

Chapter 14 - Filters and Rules 137