Avocent Cyclades-PR4000 installation manual Menu Items Description, Ansi

Cyclades-PR4000

Wizards Menu CONFIG =>INTERFACE =>T1/E1 =><CHANNEL> =>WIZARDS

Menu Items	Description
TS Profile	Used to create a local host Terminal Server. For CCS, the only parameter is the
	Username. For CAS, the parameters are the Username, the Phone Number for the
	channel, and the Digital Modem Profile ID.
RAS Profile	Used to set up a PPP Remote Access Server using modems and dial-up lines. The
	Remote IP Address of the first port is the only parameter, for CCS. For CAS, the
	parameters are Remote IP Address, the Phone Number for the channel, and the
	Digital Modem Profile ID. If the Wizard is used for a range or all ports, the following
	ports will be the numbered consecutively.
Lan-to-Lan Profile	Used to connect two LANs. The only parameters are the Primary IP Address, the
	Subnet Mask, any Secondary IP Addresses and Subnet Masks, the Remote IP
	Address Type and the Address. For CAS, the parameters Phone Number and Digital
	Modem Profile ID are also requested.
Copy From Channel	Used to copy an entire configuration from one channel to another, while changing the
	IP address so that the ports are numbered consecutively.

The parameters automatically configured by the terminal server wizard are shown in Figure 8.11.

Encapsulation	CHAR
Device Type	Terminal
TCP KeepAlive	Inactive
Terminal Type	ANSI
Escape Session Character Code	1
Switch Session Character Code	11
Direct Login User	***
Dial-Out	Non-Automatic (CCS only)
Phone #	*** for CAS
Digital Modem Profile ID #	*** for CAS

FIGURE 8.11 PARAMETERS SET BY THE TS WIZARD

Chapter 8 - The E1 and T1 Interfaces, With Signaling 72