Avocent Cyclades-PR4000 installation manual CONFIG=IP=BGP4=GLOBAL, CONFIG=IP=BGP4=BGP NETWORK=ADD

Cyclades-PR4000

CONFIG=>IP=>BGP4=>GLOBAL

Parameter	Description
BGP4 Protocol	Activates the protocol.
Local AS Number	This number is assigned by the service provider.
Router Identifier	Usually the same as the Router ID, one of the interface IP addresses
Cluster Identifier	Only used when this router is used as a router reflector.
Default Local	Value of the attribute "local pref" used by IBGP.
Preference
Accept Connections	Allows BGP connections from neighbors that have not been specified in the Neighbors
From All Peers	Menu.
Advertise Direct	Allows the removal of the interface routes from the list of routes to be advertised. In
Routes	the example these would be 100.100.100.1, 200.200.200.1 and the LAN interface IP
	address.
Advertise Static	Allows the removal of static routes from the list of routes to be advertised.
Routes
Advertise RIP Routes	Allows the removal of routes learned via RIP from the list of routes to be advertised.
Advertise OSPF	Allows the removal of routes learned via OSPF from the list of routes to be advertised.
Routes

The BGP network menu allows registration of the IP Addresses contained in the AS. This will mark these routes as IGP instead of EGP or incomplete in the path origin attribute.

CONFIG=>IP=>BGP4=>BGP NETWORK=>ADD

Parameter	Description
Network Address	Network IP address of network to be added.
Network Mask (bitlen)	Mask in CIDR format.

Chapter 11 - Routing Protocols 105