![](/images/new-backgrounds/1230029/23002943x1.webp)
POWER CONNECTION
POWER CONNECTION
Power (mains) cord connection
Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector at the front of the projector.
See installation instructions before connecting to t he supply
|
|
|
|
|
|
|
|
|
|
|
|
|
| V NO M | 120/230 Volt | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| I MAX | 5/2. 5 A MP | ||||
|
|
|
|
|
|
|
|
| O F F O N | FR EQ | 60/50 Hz | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
See installation instructions before con nectin g to t he sup ply
|
|
|
|
|
|
|
|
| V NOM | 1 20 / 23 | 0 Volt |
|
|
|
|
|
|
|
|
| I MAX | 5/ 2 . 5 | AM P |
|
|
|
|
|
|
|
|
| |||
O F F O N | F REQ | 60 / 50 Hz | |||||||||
|
|
|
Switching on/off
The projector is switched ON and OFF using the power (mains) switch ON/OFF.
Pressed : ON
Not pressed : OFF
The projector can start now in the 'operational mode' (image displayed) or in the 'stand by mode', depending on the position of the 'power up' dip switch on the controller unit. This DIP switch is set during installation by a qualified technician.
If you want to change this start up mode, call a qualified technician.
Stand by indication lamp :
no light up : projector in operational mode
red : projector is in stand by.
Leds on the front plate of the projector
+9V +17V | +210V | +HTHD +CONV | STANDBY | HOLD DOWN | SF | COINC | HOLD DOWN | ||
|
|
|
|
|
| EHT |
|
| HD |
| R5975238 BARCOVISION 701 MULTIMEDIA 070497 | |
| ||
|
|
|