![](/images/new-backgrounds/1230029/230029111x1.webp)
GUIDED ADJUSTMENT MODE
Selecting Setup Pattern
If an external source is con- nected to the projector, the Setup pattern menu will be dis- played. Push the control disk up or down to highlight the desired setup pattern and then press ENTER.
Genlocked pattern : internally generated cross hatch pattern, locked on the external source.
Internal # pattern : internally generated cross hatch pattern and locked on internal gener- ated sync signals. (No external source necessary)
C h o o s e |
|
|
a s e t u p p a t t e r n |
|
|
f ro m b e l o w : |
|
|
S E L E C T E D S O U R C E |
| |
G E N L O C K E D P A T T E R N |
| |
I N T E R N A L # P A T T E R N |
| |
| s o u r c e | 1 |
Se lec t w ith | o r |
|
t h e n < E N TE R > |
|
|
< E X I T> t o re t u rn |
|
|
ENTER continues to Guided Adjustment Mode or Internal # Pattern Selection EXIT returns to Path Selection ADJUST returns to operational mode
If no external source is con- nected to the projector, the in- ternal cross hatch pattern menu will be displayed.
The menus in this manual are created for an external source, connected to one of the inputs, and the 'Genlocked pattern' is selected.
GUIDED ADJUSTMENT MODE
| R5975238 BARCOVISION 701 MULTIMEDIA 070497 | |
| ||
|
|
|