SERVICE MODE
Undo green convergence mid
Only available when the projector is equipped with green conver- gence adjustmentes.
The item 'Undo green convergence mid' will automatically be displayed when the green convergence is switched to midposition.
Press ENTER to switch on the green convergence.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS R & B CONVERGENCE MID
UNDO GR CONVERGENCE MID
Select with 
or then <ENTER> <EXIT> to return.
Common Settings
Highlight 'Common settings' by push- ing the control disk up or down and press ENTER to display the com- mon settings menu.
Within the common settings menu, the following items can be set up or executed :
-G2 adjustment
-CRT run in cycle
-Projector warm up
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with 
or then <ENTER> <EXIT> to return.
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
Select with | or |
then <ENTER> <EXIT> to return.
SERVICE MODE
R5975228 BARCOVISION 701 MULTIMEDIA 070597 |
| |
|
