OPTIONS
Projector Control software
Only available for projectors equipped with the optional RS232 communication port.
The software is
Two main applications are available with this software : remote control and transferring and receiving data of projector settings.
remote control simulation. Advantage : address range 0 to 15.
adjustment data : where can it be located when an IBM PC (or compatible) or MAC or Workstation is connected :
-hard memory device with files of settings.
-the contents of the local memory of the computer.
-the contents of the projector.
RCVDS 05
An optional RCVDS 05 source selector makes it possible to connect up to 20 sources to the projector. When RCVDS's are linked via the expansion module, even 90 inputs can be connected to the projector.
The selected source number will be displayed on a 2 digit display and the selected input module will be indicated with a LED on the rear.
VS05
The VS05 is a versatile Video and HDTV source selector for all BARCO's digitally controlled large screen projectors. It offers the possibility to connect and switch up to 5 different Video sources, 3 different
Adapter and communication cables
BARCO provides several cables to connect peripheral equipment to the projector.
a. D9-D9 communication cable
-To connect an IBM PC (or compatible) to the projector. (only if the optional RS232 port is installed.)
-To connect an RCVDS to the projector.
-To connect an IR receiver to the RCVDS05 or to the projector.
-To be used as extension cable for all other adapter cables.
Available length :5 m (16ft), order number R982770; 15 m(50ft), order number R9827560; and 30 m (100ft), order number R9827570
OPTIONS
R5975238 BARCOVISION 701 MULTIMEDIA 070497 |
| |
|
