Barco R9000740 owner manual Power up mode, Identification

SERVICE MODE

The following baud rates are avail- able :

-9600

-4800

-2400

-1200

-600

-300

-150

-110

The actual baud rate will be high- lighted. To change the baud rate, push the control disk up or down or to the left or to the right to select the desired baud rate and press ENTER to accept this baud rate.

BAUDRATE
Select new
baudrate :
9600	4800
2400	1200
600	300
150	110

Select with arrow keys ;

<ENTER> to accept

<EXIT> to return.

ENTER to accept the selected baud rate.

EXIT to return without changing the baud rate.

Power up mode

When pressing the power switch,
the projector can start up in 'oper-	PROJECTOR SET-UP
ating mode' or in 'stand-by mode'
Operating mode : the projector start	IDENTIFICATION
up and displays image .	TOTAL RUN TIME
	CHANGE PASSWORD
Stand-by mode : the projector start	CHANGE LANGUAGE
	CHANGE PROJECTOR ADDRESS
up in stand-by and waits until the	CHANGE BAUDRATE
	POWER UP MODE : operating
stand-by button or a digit key is	BARCO LOGO
pressed.
To change the Power up mode,	Select with or
select Power Up mode by pushing	then <ENTER>
	<EXIT> to return.
the control disk up or down and
press ENTER to toggle between
'Operating' and 'Standby'.	ENTER to toggle between operating and
	standby.
	EXIT to return to the Service menu.

SERVICE MODE

R5975228 BARCOVISION 701 MULTIMEDIA 070597 9-9