DS72 Host Module
Figure 4
User Management Menu
To change user password, enter number of user.
To add/delete user, select appropriate menu choice.
Enter request, CR to exit menus.
A)...Add user 1)...admin
Enter Request :a
Network Port Configuration
Figure 5
Network Configuration |
|
| ||
IP Address: | 0.0.0.0 |
|
|
|
Subnet Mask: | 0.0.0.0 |
|
|
|
Gateway: | 0.0.0.0 |
|
|
|
Ethernet Address: 00.C0.48.06.57.4C |
| |||
Connection Inactivity Timeout (mins): Disabled | ||||
Carriage Return Translation: Disabled |
| |||
Break Length (msecs): 350 |
| Telnet is Enabled | ||
DHCP is Disabled | Bootp is Enabled | |||
IP Address |
| 1 | Ethernet port IP Address 0.0.0.0 | |
Subnet Mask |
| 2 | Tells when to listen Address 0.0.0.0 | |
Gateway Address | 3 | Router/Hub/Switch IP Address 0.0.0.0 | ||
Inactivity Timeout | 4 | Set timeout, in minutes | ||
Carriage Return Translation | .......5 | (<=120,0=disable) | ||
Enable/Disable | ||||
Break Length |
| 6 | Set in milliseconds (<=10000, | |
Bootp |
| 7 | 0=disable) | |
| Enable/Disable | |||
DHCP |
| 8 | Enable/Disable | |
Telnet |
| 9 | Enable/Disable | |
Exit |
| X,CR |
| |
IMPORTANT: For network access, either Enable the DHCP, BOOTP or disable the DHCP and BOOTP, then configure the IP addresses, Subnet Mask, and Gateway Address. The module must be reset for network changes to take effect.
10
