Panasonic WJ-NT314 Configure the settings relating to camera Camera, About the operation panel

Configure the settings relating to camera [Camera]

Click the [Camera] tab on the "Camera setup" page. (☞ page 26)

The following are descriptions of how to display the setup menu and configure the settings relating to camera opera- tion using the operation panel. Refer to the provided operating instructions for further information about emergency recording.

[CH No.]

Select a channel to configure the setting relating to the camera operation.

ZOOM buttons, FOCUS buttons, Control pad/buttons

Refer to page 6 for further information.

About the operation panel

Use the following buttons on the operation panel to operate the "Camera setup" page using a PC.

[ON] button: Click this button to display the top page of the "Camera setup" page.

[OFF] button: Click this button to close the "Camera setup" page.

[SET] button: Click this button to move to the submenu.

[Left] button/ [Right] button: Click these button to select the parameters.

[Down] button/ [Up] button: Click these buttons to move the cursor.

[ESC] button: Click this button to return to the previous page.

[RESET/SPECIAL] button: Display the SETUP MENU of camera, move the cursor onto SPECIAL, and click this button to move to the SPE- CIAL SETUP menu.

Move the cursor onto REFRESH on the SPECIAL SETUP menu, and click this button to refresh the camera position.

For further information, refer to the operating instruc- tions of the camera.

[ALL RESET] button: Click this button after moving the cursor onto CAMERA RESET on the SPECIAL SETUP menu to reset to the default setting. Refer to the operating instructions of each camera for further information about the settings to be reset.

30