Panasonic WJ-NT314 Set the depth manually, Step

Set the depth manually

Step 1

Click the [SET] button of "Depth correction" on the [AVMD] tab.

→The "Depth correction" menu will be displayed.

Step 2

Select "Manual setup" for "Setup mode".

Step 3

Draw a marker by dragging the mouse between the front side and rear side on the screen.

Notes:

•By dragging the mouse up and down, the size of marker will become larger or smaller. (Horizontal to vertical ratio is fixed to 1:3.)

•To retry drawing the marker, click [CLEAR] button.

•Assuming that people go forward and backward, it is possible to calculate the correct depth by drawing the larger marker for the nearer object (lower area in the image) and the smaller marker for the farther object (upper area in the image).

Step 4

After drawing the marker, click the [Execute] button of "Depth calculation".

→Calculation result is displayed in 3D on the screen.

Step 5

Click the [SAVE] button after completing the settings.

→Returns to the "Detection area setup" menu.

Note:

Click the [RETURN] button to return to the "Detection area setup" menu without setting the depth.

37