[Default gateway]
When not using the DHCP function, enter the default gateway of the unit.
Default setting: 192.168.0.1
<Unavailable IP addresses for the default gate- way>
0.*.*.* *.*.*.0
255.*.*.* *.*.*.255 127.0.0.1
Class D address (224.0.0.0 - 239.255.255.255) Class E address (240.0.0.0 - 255.255.255.255)
*These IP addresses for the default gateway are unavailable even when using the DHCP function. Refer to the network administrator for the settings of the DHCP server.
[HTTP port]
Assign the port numbers independently.
Available port number: 1 - 65535
Default setting: 80
[DNS]
Select "AUTO" or "MANUAL" to determine whether or not to use the DNS.
When "MANUAL" is selected, it is necessary to config- ure the settings for the DNS.
When using the DHCP function, it is possible to obtain the DNS address automatically by selecting "AUTO". Refer to the network administrator for further information about the settings.
Default setting: MANUAL
[Primary DNS], [Secondary DNS]
When "MANUAL" is selected for "DNS", enter the IP address of the DNS. Refer to the network administrator about the IP address of the DNS.
Default setting: (blank)
[Line speed]
Select the line speed for data transmission from the fol- lowings. It is recommended to use the default setting "AUTO".
AUTO: Line speed will be applied automatically.
Default setting: AUTO
[FTP access]
Select "Allow" or "Forbid" to determine whether to allow or forbid the FTP access.
Default setting: Forbid
51
