Configure the settings relating to DDNS [DDNS]
Click the [DDNS] tab on the "Network setup" page. (☞ page 50) The settings relating to DDNS can be configured on this page.
When accessing the unit via the Internet from the network environment of which the global IP address is obtained using DHCP, the DDNS function is necessary.
When using the DDNS function, it is possible to access with "Host name registered in the DDNS server. nmdns. net". To use the DDNS function, it is necessary to connect to the dedicated DDNS server. Refer to the web site for further information about the DDNS. Refer to the "Readme" file about the web site.
It is necessary to configure the host name, user name and password registered in the DDNS server.
[Access interval]
Select the interval to access the DDNS server to check the IP address and the host name from the following.
1 min/10 min/30 min/1 hour/6 hours/24 hours Default setting: 1 hour
Note:
When “1 min” is selected, error message may be displayed on the [System log] tab of the "Maintenance" page (☞ page 57) depending on the response from the DDNS server. This does not affect operation of the unit.
[DDNS]
Select "ON" or "OFF" to determine whether or not to use the DDNS function.
Default setting: OFF
[Host name]
Enter the host name to be used.
Number of characters that can be entered: 1 - 64
characters
Default setting: (blank)
[User name]
Enter the user name (login name) to access the DDNS server.
Number of characters that can be entered: 1 - 32
characters
Default setting: (blank)
[Password]
Enter the password to access the DDNS server.
Number of characters that can be entered: 0 - 32
characters
Default setting: (blank)
53
