Panasonic WJ-NT314 manual Jpeg setup

■JPEG setup

[Refresh interval (JPEG)]

Select an interval to refresh the displayed JPEG image from the following.

NTSC model: 0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps/ 2 fps/3 fps/5 fps */6 fps */10 fps */15 fps */30 fps * Default setting: 3 fps

PAL model: 0.08 fps/0.17 fps/0.28 fps/0.42 fps/

0.83fps/1.7 fps/2.5 fps/4.2 fps */5 fps */8.3 fps */

12.5fps */25 fps * Default setting: 2.5 fps

Notes:

•Depending on the setting value of "CH selection", "MPEG-4 transmission", "Image capture size" of JPEG setup, or "Image quality" of JPEG setup, the refresh interval may be lower than the value when the setting value with an asterisk (*) on the right is selected. (☞ page 29)

•JPEG images are not encoded exceeding the setting value of "Refresh interval (JPEG)". (At least 3 fps is secured.)

When a connected device requests an exceeding value, change the setting value of "Refresh interval (JPEG)".

[Image capture size]

Select "VGA (640 x 480)" or "QVGA (320 x 240)" for the image capture size of JPEG images.

Default setting: VGA (640 x 480)

[Image quality]

Select image quality of JPEG images from the following. 0 Super fine/1 Fine/2/3/4/5 Normal/6/7/8/9 Low Default setting: 5 Normal

Note:

The set values of "Image capture size" and "Image quality" of JPEG setup will be common between a still picture (one shot), the alarm image FTP trans- mission, and the FTP periodic transmission.

[To individual setup] button

Moves to the individual setup page. (☞ page 29)

■[MPEG-4 setup (CH common)] [MPEG-4 transmission]

Select "ON" or "OFF" to determine whether or not to transmit MPEG-4 images.

ON: Transmits MPEG-4 images.

OFF: Does not transmit MPEG-4 images.

Default setting: ON

Note:

When "ON" is selected for "MPEG-4" transmission, displaying rather of MPEG-4 image or JPEG image will be available. However, the refresh interval (JPEG) may be longer than the set value when dis- playing JPEG images.

[Max bit rate (per 1 client)]

Select a MPEG-4 bit rate per a client from the following. 64 kbps/128 kbps */256 kbps */512 kbps */1024 kbps */ 1536 kbps */2048 kbps */3072 kbps */4096 kbps */ 6144 kbps *

Default setting: 512 kbps *

Note:

The MPEG-4 bit rate is synchronized with "Total bit rate" (☞ page 26). For this reason, the bit rate may be lower than the value when the setting value with an asterisk (*) on the right is selected.

[Image capture size]

Select "VGA (640 x 480)" or "QVGA (320 x 240)" for the image capture size of MPEG-4 images.

Default setting: VGA (640 x 480)

[Image quality]

Select image quality of MPEG-4 images from the follow- ing.

Fine/Normal/Low

Default setting: Normal

[Refresh interval (MPEG-4)]

Select an interval (I-frame interval; 1 - 5 seconds) to refresh the displayed MPEG-4 images.

If using under the network environment with frequent error occurrences, shorten the refresh interval for MPEG-4 to diminish image distortions. However, the refresh interval (MPEG-4) may be longer than the set value when displaying JPEG images.

Default setting: 3 sec

[To individual setup] button

Moves to the individual setup page. (☞ page 29)

■[MPEG-4 setup (CH individual)] [Transmission type]

Select a MPEG-4 transmission type from the following. Unicast port (AUTO): Up to 8 users can access a sin- gle camera concurrently. "Unicast port1 (Image)"

27