Panasonic WJ-NT314 manual Select P Bla when setting an area not to activate AVMD, Step

Notes:

•Color in the ( ) beside the icon is the color to display the detection area.

•Select a parameter from "P1 (Blu)" to "P3 (Yel)" when setting an area to detect an intruder. Alarm occurs when a moving object enters the area. It may take around 2 seconds since the person is detected until the alarm occurs.

•Select "P (Bro)" when setting an area to detect the object abandonment or removal. Alarm occurs when an object is taken into the area or when the object is taken away from the area.

•To detect the object abandonment or removal, it is necessary to shoot the background around 2 min- utes to memorize the image before the object is abandoned or removed. When the detection condi- tion changes and a camera moves to the selected preset positions according to the schedule, detection of abandoned or removed objects is not activated around 2 minutes.

•Select "P (Bla)" when setting an area not to activate AVMD.

Even moving objects are not detected in the area.

wSelect the shape of frame by clicking "Paint quad- rangle detection area" or "Paint polygon detection area" of "Paint type".

eWhen selecting "Paint quadrangle detection area", set a square area by dragging the mouse on the screen. When selecting "Paint polygon detection area", set a polygonal area by designating the apex- es on the screen. (It is possible to designate up to 16 apexes.) The detection area is painted by con- necting start points and end points.

Note:

When deleting the detection area, click the "Select painted detection area" icon, select the frame on the screen by the mouse, and click the [CLEAR] button.

rAfter setting all the areas, check the [Valid] of desired areas.

Important:

Alarm will not occur even when an area is set with- out checking the [Valid].

Step 6

After completing the detection area settings, perform the depth correction.

Click the [BSET] button to move to the "Depth correc- tion" menu. (☞ page 36)

35