Panasonic WJ-NT314 Set the AVMD schedule Schedule, How to configure the schedule settings, Step

Set the AVMD schedule [Schedule]

Click the [Schedule] tab on the "Video analytics setup" page.(☞ page 34) It is possible to set the schedule for each detection program.

For example, to monitor the entrance and exit, it is possible to set the detection program for the entrance between 6 a.m. and 12 a.m. on Monday to Friday, and for the exit between 4 p.m. and 12 p.m. on Monday to Friday.

How to configure the schedule settings

Step 6

To check the schedule on the time bar, click [i] and select the channel number (detection program) from the [CH No.] pull-down menu.

→ The schedule of detection program set for the select- ed channel will be displayed on the time bar. The col- ors of time bar differ depending on detection pro- grams. (The colors are displayed beside [CH No.])

Step 1

Select the schedule number from "Schedule 1" to "Schedule 8".

Step 2

Check the check box of the desired day of the week.

→The selected day of the week will be validated for the schedule.

Step 3

To designate time, click [i] and select the desired "hour" and "minute".

When not designating time, check the checkbox of "24 hours".

Available value: 00:00 – 23:59

Step 4

Select the detection program.

→The channel number set for the selected detection program will be displayed in "CH No.".

Step 5

Click the [SET] button after completing the settings.

38