Configure the basic settings of the unit [Basic setup]
The basic settings such as time and date and unit name, and the settings relating to the NTP server and the SD memory card can be configured on the "Basic setup" page.
The "Basic setup" page has 4 tabs of the [Basic] tab, the [NTP] tab, [SD memory card] tab, and the [RS485 setup] tab.
Configure the basic settings [Basic]
Click the [Basic] tab on the "Basic setup" page.
The settings such as the unit name, time and date, etc. can be configured on this page.
[Unit title]
Enter the title of the unit. Click the [SET] button after entering the title of the unit. The entered title will be displayed in the status display area.
Number of characters that can be entered: 0 - 20
characters
Default setting: WJ-NT314
[Camera title]
Enter the names of the cameras connected to VIDEO IN connectors. The entered names will be displayed in the upper left area.
Number of characters that can be entered: 0 - 20
characters
Default setting: Name of CH1:
[Time & date setup]
Enter the current time and date. When
Available value: 01/01/2006 00: 00: 00 - 12/31/2035 23: 59: 59
[Time display]
Select the time display format from
Default setting:
[Date/time display format]
Select a date/time display format.
When "04/01/2007 13:10:00" is set for "Time and date setup" after selecting
DD/MM/YYYY: 01/04/2007 13:10
MM/DD/YYYY: 04/01/2007 13:10
DD/Mmm/YYYY: 01/Apr/2007 13:10
YYYY/MM/DD: 2007/04/01 13:10
Mmm/DD/YYYY: Apr/01/2007 13:10
Default setting: Mmm/DD/YYYY (NTSC model) DD/MM/YYYY (PAL model)
[Daylight saving (Summertime)]
Select "ON" or "OFF" to determine whether or not to apply daylight saving time. Select "ON" or "OFF" to determine whether or not to apply daylight saving time. ON: Applies summer time. An asterisk (*) will be dis-
played on the left side of the displayed time and date.
OFF: Does not apply summer time.
Default setting: OFF
20
