Configure the settings relating to the authentication [Authentication setup]
The settings relating to the authentication such as users and PCs restrictions for accessing the unit can be config- ured on this page.
The "Authentication setup" page has 2 tabs of the [User] tab and the [Host] tab.
Configure the settings relating to the user authentication [User]
Click the [User] tab on the "Authentication setup" page.
The settings relating to the user authentication can be configured on this page. Up to 16 users can be registered.
Note:
When user authentication (authentication error) has failed to pass 8 times (6 times when clicking the [Go] button of the browser) within 30 seconds using the same IP address (PC), access to the camera will be denied for a while.
[User authentication]
Select ON or OFF to determine whether or not to authenticate the user.
Default setting: OFF
[User name]
Enter a user name.
Number of characters that can be entered: 1 - 32
characters
Default setting: (blank)
[Password] [Retype password]
Enter the password.
Number of characters that can be entered: 4 - 32
characters
Default setting: (blank)
Note:
When the user name already in use is entered and the [SET] button is clicked, the respective user infor- mation will be overwritten.
For example, the password for the administrator can be changed by entering "admin" for "User name", selecting "1. Administrator" for "Access level", enter- ing a desired password, and clicking the [SET] but- ton.
[Access level]
Select the access level of the host from the following.
1.Administrator: Allowed all available operations of the unit.
2.Camera control: Allowed to display images from the unit and to control the unit. The unit setting configu- ration is unavailable.
3.Live only: Only displaying live images is available. The unit setting configuration and unit control are unavailable.
Default setting: 3. Live only
Note:
By clicking [i] of "User name check", the registered user can be selected and the selected user’s infor- mation can be checked.
The registered user will be displayed with the access level. (Example: admin [1])
To delete the registered user, click the [DEL] button after selecting the user to be deleted.
46
