Configure the schedule settings of the FTP periodic transmission [Schedule setup]
Click the [FTP] tab on the "Network setup" page. (☞ page 50)
The schedule settings of the FTP periodic transmission can be configured on this page. Refer to page 55 for further information about the settings relating to the FTP periodic transmission.
How to configure the schedule settings | How to delete the set schedule | ||
|
|
|
|
|
|
|
|
Step 1
Check the check box of the desired day of the week.
→The selected day of the week will be validated for the schedule.
Step 2
To designate time, click [i] beside the hour and minute and select the desired "hour" and "minute".
When not designating time, check the checkbox of "24 hours".
Step 3
Click the [SET] button after completing the settings.
→The result will be displayed at the bottom of the win- dow.
Step 1
Uncheck the check box of the desired day of the week.
Step 2
Click the [SET] button after completing the settings.
→The result will be displayed at the bottom of the win- dow.
56
