Panasonic WJ-NT314 manual Symptom, Cannot access from the browser, Cause/solution, Reference pages

Symptom

Cannot access from the browser.

The buttons on the browser are displayed out of align- ment.

Some contents are not dis- played on the browser.

Cannot close the authentica- tion window.

Browser disconnection sometimes occurs.

Network performance is poor.

Cause/solution

•Is the same IP address provided to other devices? Are there contradictions between the address and the network subnet to be accessed?

<When the unit and the PC are connected in the same subnet>

Are the IP addresses of the unit and the PC set in a common subnet? Or is "Use Proxy Server" for the set- tings of the browser checked?

When accessing the unit in the same subnet, it is rec- ommended to enter the address of the unit in the "Don’t Use Proxy For These Addresses" box.

<When the unit and the PC are connected in the dif- ferent subnet>

Is the IP address of the default gateway set for the unit correct?

•The buttons may not be displayed orderly if the font setting of Windows has been changed from the default setting.

Use with the default font setting.

•Reload the contents by pressing the [F5] key.

•Are the correct user name and password entered? Confirm the correct user name and password.

•The settings relating to the bit rate may be beyond the maximum network performance.

Lower the value/rate of the settings relating to the bit rate such as the refresh interval.

•The line speed settings may be not the same between the unit and the hub, for example, 100M BASE-TX Full for the unit and 100M BASE-TX Half, etc. Some hubs change the line speed automatically depending on the network traffic and it may cause configuration errors. Check the line speed settings of both the unit and the hub, and configure the line speed settings of both to conform them.

Reference

pages

47

–

–

46, 47

26

–

63