Belkin F1DP108G Maintenance, Firmware Upgrade, To upgrade firmware, Remote Installation, section

Remote Installation

Maintenance

Firmware Upgrade

You can upgrade the Switch’s firmware to take advantage of new features or fixes as they become available. Visit www.belkin.com/support to check for firmware updates.

To upgrade firmware:

1.Download and save the firmware file on the client computer.

2.Select “Firmware Upgrade” under “Maintenance” in the far-left menu of the web interface. The Firmware-Upgrade page will appear (see Fig. 8).

3.Click to locate and install the firmware file.

4.Click “Start Upgrade”.

5.Once the upgrade is complete, click “Reboot”. The unit should reboot. After about 30 seconds, the Login page should appear.

Fig. 8 Firmware-Upgrade Page

Note: Depending on the type of firmware upgrade, the following settings

may be erased: user settings, switch-configuration settings, mouse and video adjustments, and RS232 serial-device settings. For more information, refer to the firmware release notes. The network settings will remain intact.

1

2

3

4

5

6

7

8

9

10

section

41