Belkin F1DP108G user manual Auto Video Adjust, Using the Switch from a Remote Console, section

Using the Switch from a Remote Console

Fig. 18 Manual Video-Adjust Bar

Auto Video Adjust

To adjust the video automatically:

1.Open Internet Explorer (or similar) in the background.

2.In the quick-access toolbar, click .

3.Select “Auto video adjust”.

The process will take a few seconds. If the process runs for more than three seconds, there may be an abnormal noise level. Check the video cable and verify that no dynamic-video application is running on the target server’s desktop.

Perform this procedure where necessary for each target server or new screen resolution.

1

2

3

4

5

6

7

8

9

10

section

53