Using the Switch from a Remote Console
Selecting a Server
The
To connect to a different server:
1.Move the cursor to the area above the video screen; the toolbar will show up.
2.In the 
. A list of connected servers will appear (see Fig. 20). If a serial device is connected to the IP Device, it will also appear on the list.
3.Select the desired server or serial device. The screen of the server or the
Note: If security is enabled on the KVM switch, remote switching will not be allowed through the
Fig. 20 Server-Selection Menu
1
2
3
4
5
6
7
8
9
10
section
55
