English
Personalizing the projector menu display
The On Screen Display (OSD) menus can be set according to your preferences. These settings do not affect the projection settings, operation, or performance.
•Language in the System Setup menu sets your familiar language for the
•You can select the projector’s Background Color from black, blue or purple in the System Setup menu.
•Menu Display Time in the System Setup > Menu Settings menu sets the length of time the OSD will remain active after the last button press.
•Menu Position in the System Setup > Menu Settings menu adjusts the OSD position on the screen.
Turning the power off
1.Press 
POWER on the projector or remote control and a prompt message appears. Press
POWER a second time to turn the projector off.
2.The Power indicator light flashes orange, the lamp shuts down, and the fans continue to run for approximately 140 seconds to cool down the projector.
POWER OFF
Press button again to power off
Press any button to cancel
To protect the lamp, the projector will not
respond to any commands during the cooling process.
3.The Power indicator light is a steady orange once the cooling process has finished and fans stop.
4.Disconnect the power cord from the wall socket.
34 Using the projector
