The final connection path should be like that shown in the following diagram:

HDMI device: DVD player, digital tuner, etc.

 

From audio output

To audio input

terminals

terminals

HDMI cable

• It is not recommended to establish the connection via a DVI to HDMI cable. The weight of the DVI to HDMI adapter may be pulling down on the HDMI port, causing it to become loose over time.

If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, please check that the video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.

Connecting a Component-Video source device

Examine your Video source device to determine if it has a set of unused Component Video output sockets available:

If so, you can continue with this procedure.

If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to a Component Video source device:

1.Take a Component Video cable and connect one end to the Component Video output sockets of the Video source device. Match the color of the plugs to the color of the sockets; green to green, blue to blue, and red to red.

2.Connect the other end of the Component Video cable to the COMPONENT sockets on the projector. Match the color of the plugs to the color of the sockets; green to green, blue to blue, and red to red.

3.You should also connect the separate audio cable to a suitable audio amplifier.

The final connection path should be like that shown in the following diagram:

AV equipment: DVD player, digital tuner, etc.

From audio output

To audio input

terminals

terminals

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Component cable

If you connect the projector to a High Definition TV (HDTV) tuner, the following standards are supported:

480i

480p

576i

576p

• 720p (50/ 60 Hz)

 

 

• 1080i (50/ 60 Hz)

• 1080p (24/ 50/ 60 Hz)

If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, please check that the video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.

English

Connection 21

Page 21
Image 21
BenQ W500 Connecting a Component-Video source device, To connect the projector to a Component Video source device