Temperature information
When the Temperature warning light is on, it is warning you of the following possible problems:
1.The internal temperature is too high.
2.The fans are not working.
Turn the projector off and contact qualified service personnel for further help. For more detailed information, please refer to "Indicators" on page 47.
Indicators
Illustration
• | Blank | • | O: Orange light | ||||||
• |
|
|
|
|
|
| : Light flashing | • | R: Red light |
|
|
|
|
|
| ||||
|
|
|
|
|
| • | G: Green light | ||
• |
|
|
|
|
|
| : Light ON | ||
|
|
|
|
|
| ||||
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Light | Status & Description | ||
Power Temp Lamp
|
|
| Power events |
O | O | O | The projector has just been connected to a power outlet. |
O | R | R | Main power switch on |
O | - | - | |
G | - | - | Powering up. |
G | - | - | Normal operation. |
•The projector needs 140 seconds to cool down as it was abnormally shut down without the normal cooling down
O |
| - | - | process. Or |
| ||||
|
•The projector needs to cool for 90 seconds after the power is turned off.
|
|
|
|
|
|
| - | - | The projector has shutdown automatically. If you try to re- |
|
| O |
| start the projector, it will shutdown again. Please contact | |||||
|
|
| |||||||
|
|
|
|
|
|
|
|
| your dealer for assistance. |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Lamp events |
|
|
|
|
|
|
|
|
|
|
G | - | - | Lamp hour warning/Lamp hour error. | |
| - |
| The projector has shutdown automatically. If you try to re- | |
O | R | start the projector, it will shutdown again. Please contact | ||
|
|
| your dealer for assistance. | |
- | - | R | 1. | The projector needs 90 seconds to cool down. Or |
2. | Please contact your dealer for assistance. | |||
English
Maintenance 47
