37
Menus
English
Picture--Basic menu
The Picture--Basic menu allows you to adjust the finer details of the projected image quality.
Before making adjustments, you are suggested to choose a desired picture mode in this menu which has set
some certain values in order to meet different lighting environment and presentation purposes.
FUNCTION (default
setting / value) DESCRIPTION
Picture Mode
(D-sub (Analog
RGB)/HDMI:
Standard;
S-Video/
Component/
Video: Standard)
Picture modes are provided so you can optimize your projector image set-up to suit
your program type. See "1. Selecting a picture mode" on page 28 for details.
Load Settings
From
Loads the settings from one of the preset picture modes and three User Modes. This
function is only available when the picture mode is set as User 1/2/3. See "Setting the
User 1/User 2/User 3 modes" on page29 for details.
Brightness (50)
Adjusts the brightness of the image.
The higher the value, the brighter the
image. And lower the value, the
darker the image. Adjust this control
so the black areas of the image appear
as black and that detail in the dark areas is visible.
Contrast (50)
Adjusts the degree of difference
between dark and light in the
image. The higher the value, the
greater the contrast.
Color (50) Increase or decrease the color intensity of the image. The higher the value, the more
vivid and brighter the color.
Tint (0) Adjusts the color tones of the image. The higher the value, the more greenish the
picture becomes. The lower the value, the more purplish the picture becomes.
Sharpness (0) Adjusts the picture sharpness. The higher the value, the sharper the picture.
Reset Picture
Settings
Returns the image settings of the current picture mode to the factory preset values.
If the User 1/User 2/User 3 has been renamed, the new name will remain
unchanged.
Rename User
Mode
Changes User 1/2/3 to your desired name. See "Renaming the User 1/User 2/User 3
modes" on page29 for details.
+50
+30 +70
+30 +50 +70