English

Lamp Information

Calculation of lamp hour

When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. The method of calculating the equivalent lamp hour is as follows:

Total (equivalent) lamp hour

= 1 (hours used in Economic mode) +3/2 (hours used in normal mode)

See "Lamp Settings" on page 40 for more information on Economic mode.

The lamp hour in Economic mode is calculated as 2/3 of that in normal mode. That is, using the projector in Economic mode helps to extend the lamp hour by 1/3.

Warning message

When the Lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode.

For more detailed information on projector warnings, please refer to "Indicators" on page 47.

The Lamp indicator light and Temperature warning light will light up if the lamp becomes too hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up after turning the power back on, please contact your dealer.

The following Lamp warning displays will remind you to change the lamp.

Message

Status

WARNING

Total (equivalent) lamp hour has reached 2000 hours. Install a new

NOTICE: Order replacement lamp

lamp for optimal performance.

Lamp > 2000hrs

 

Projector will stop at 3000hrs

 

OK

 

 

 

WARNING

Total (equivalent) lamp hour has reached 2950 hour. A new lamp

NOTICE: Replace lamp soon

should be fitted to avoid the inconvenience when the projector runs out

of lamp time.

Lamp > 2950hrs

 

Projector will stop at 3000hrs

 

OK

 

 

 

WARNING

Total (equivalent) lamp hour has reached 3000 hours. It is strongly

NOTICE: Replace lamp now

recommended that you replace the lamp at this age. The lamp is a

consumable item. With the usage time increase, the lamp brightness

Lamp > 3000hrs

diminished gradually. This is normal lamp behaviour. You can replace

 

Lamp-usage time exceeded

the lamp whenever you notice that the brightness level has significantly

diminished. If the lamp is not replaced beforehand, it must be replaced

OK

 

after 3000 hours usage

 

 

44 Maintenance

Page 44
Image 44
BenQ W500 user manual Lamp Information, Calculation of lamp hour