BIXOLON service manual Case Upper Assy SRP-270D Type, Printer Assy SRP-270A & SRP-270C Type

SRP-270

5-6 Case Upper Assy (SRP-270D Type)

1.Push the locking lib to the direction of arrow and remove the Cover Assy, as shown below.

2.Remove four screws securing the Case Upper. Separate the Case Upper from the Case Lower.

5-7 Printer Assy (SRP-270A & SRP-270C Type)

1. Before you disassembly the Printer	2. Remove two screws securing the Printer Assy.
Assy, you should remove :	Separate the Printer Assy from the Case Lower.
- Plate Bottom (see Chapter 4-2)

- Cover Assy (see Chapter 4-3 & 4-4)

- Case Upper Assy (see Chapter 4-6)

Rev. 3.02 - 42 -