![](/images/new-backgrounds/1298990/29899095x1.webp)
SRP-270
8. Appendix (Spec of SMP-710/710N)
8-1 Specifications
8-1-1 Printing specifications
Item | Description | |
|
| |
Printing method | serial impart | |
Head wire configuration | ||
|
| |
Dot pitch | 0.352mm(1/72") | |
|
| |
Dot wire diameter | 0.3mm(0.01") | |
Printing direction | Bidirectional with logic seeking | |
|
| |
Printing width | 63.5mm(2.5") | |
Line feed | 4.233mm(1/6") (default setting) | |
|
| |
Paper feed method | Friction feed | |
|
| |
Paper feed speed | Approximately 6.2 inches/second (during continuous paper feeding) | |
Characters per line | See the table on the next page | |
|
| |
Characters per inch | See the table on the next page | |
Total dot count | 7×9 font (400 | |
(horizontal direction) | 9×9 font (400 | |
|
| |
Print speed | Approximately 4.6 lines/second (40 columns, 16cpi) | |
Approximately 8.4 lines/second (16 columns, 16cpi) | ||
| ||
|
|
※NOTE: If the print duty ratio is too high, the operation of the print head is stopped by the duty limit. In such circumstances, the print speeds shown above cannot be guaranteed. cpi=characters per inch.
Rev. 3.02 | - 48 - |