Black Box 24 port, 16 port manual Resetting the line to default, 110

Resetting the line to default

This feature enables you to reset the serial line which you are configuring to the default settings. It is available in the Line Settings form (under the Line Configuration Menu).

To reset the line to the default settings proceed as follows;

1.Within the Line Configuration Menu, select Line settings (cli syntax reset line). The Line Settings form is now displayed

2.Within the Line Settings form, with the cursor at any position inside the form, press <return>.

3.The Options form is now displayed:

4.Within the Options form, select ‘reset to default’.

The line will be reset to 9600 baud, 8 data bits, 1 stop bit, no parity and software flow control; the line type will become ‘rev tel’, the TCP Port ‘23’, the Idle Timer ‘300’ seconds and the hostname the first host entered in the host table.

Black Box Console Server user guide 110