Black Box 24 port, 16 port manual Set host, Set line, Normal, 166

	inetaddress	is the internet address of the target host or network.
	status	is one of: ‘active’ or ‘passive’.
Menu	Network Configuration - Gateway - Change Gateway
equivalent
See also	add gateway, delete gateway, show gateways

set host

user level:	Use this command if you need to change the internet address of one of the hosts in
admin	your host table.
Syntax	set host hostname inetaddress
Menu	Network Configuration - Host Table - Change Host
equivalent	add host, delete host, show hosts
See also

set line

user levels:	Use this command to configure lines on the front-mounted RJ45 ports only. The
admin,	command cannot set:
normal	the Admin Port line configuration; this is fixed.
	An admin user can change the setup of any line; a normal user can change their own
	line only. On login connections, changes to the terminal type or number of video
	pages will take effect immediately. Other changes will take effect when a user next
Syntax	logs in on the line.
	set line line_number
	[speed speed]
	[parity parity]
	[stop stop-bits]
	[data data-bits]
	[flow flow-control]
	[pages pages]
	[termtype term-type]
	[dial dial-status]
	[user user-name]
	[nouser]
	[service line_service]....followed by (optionally)
	[raw/telnet/ssh][raw/telnet]
	[hostname][cs_port][host_port]

Black Box Console Server user guide 166