Black Box 24 port, 16 port manual Restoring factory default settings

Restoring factory default settings

Resetting to factory defaults using software

This feature enables you to reset the unit to its default settings. This will clear all configuration data entered by the admin user, and all user accounts, except the default admin user, will be deleted.

To reset to factory default settings from within the software (cli syntax: reset factory):

1.From the Network Configuration menu, select ‘Reset’. You will be asked to confirm the reset:

2.At the prompt, type ‘y’ to reset the unit, or ‘n’ to cancel the command.

Resetting to factory defaults using reset switch

To reset to factory defaults using the reset switch, proceed as follows;

Black Box Console Server user guide 66