Black Box 16 port, 24 port manual Configuring a user account, Configuration procedure, Values

Configuring a user account

The section includes the following:

•Configuration procedure on page 100

•User form field descriptions on page 101.

•About user levels on page 108

•CLI prompts on page 108.

Configuration procedure

To configure a user account, proceed as follows;

Tip	Your configuration will only be used if the user is authenticated by the unit. If the
	user is authenticated by RADIUS, the unit will use configuration details for users
	sent by the RADIUS host; see Configuring a dial in line on page 74.
1.	Select ‘Change User’ from the Users menu (cli syntax: set user).
2.	Choose your user from the list of names now displayed.
	A user form will now be displayed as shown in the next example (uses default
	values):

3.Within the user form, set the fields you require.See User form field descriptions on page 101 for a description of how to set each field in more detail.

4.Press <return> to exit; accept or discard the form as you wish.

Note Changes you make in this form, as the system administrator, will only take effect for a user when the user next logs in to the unit.

Black Box Console Server user guide 99