Black Box 16 port, 24 port manual 183

Where:

password	if you include this argument you will prompted to enter a new password.
user-level	is ‘admin’, ‘normal’, ‘restricted’ or ‘menuing’.
switch-	is the hex value of the ‘hot-key’ used for switching sessions.
character	The default is 1 (^a).
user-service	select one of: csprompt, telnet, rlogin, tcp_clear, slip or ppp. For more information
	on these user services see Appendix E Summary of Line Service Types.
iphost-address	(use only when you have selected a service of ‘telnet’ or ‘rlogin’); select:
	0.0.0.0 for the unit to select the default host set for all users; see set server on page
	173.
	255.255.255.255 for the unit to prompt the user for the ip address or name of the
	host to which he/she wishes to connect
	n.n.n.n (where n is a number) for any other ip address of your choosing (as system
	administrator); e.g 192.65.144.6
t-port number	(use only when you have selected a user-service of ‘telnet’) enter the TCP port
	number of the host with which the unit should start the service. The default port is
	23; in most cases you can use the default value.
callback-flag	whether the unit calls the user back when he/she connects to the unit (a security
	feature). Set either ‘on’ or ‘off’ (default is ‘off’). When ‘on’, enter a phone
	number (see below).
phone-number	a number which the unit will dial to callback the user (you must have set
	‘callback’ to ‘on’). Enter the number without spaces. To change the phone number,
	overwrite the previous entry.
i-timer value	enter a period in seconds for which the idle timer will run. Use this timer to close a
	connection because of inactivity. When the idle timer expires, if there has been no
	exchange of data, the unit will end the connection. The default value is 0 (zero),
	meaning that the idle timer will not expire (the connection is open permanently).
	The maximum value is 232 seconds.
	The idle timer (here) will override the idle timer which you can configure for a
	line.

Black Box Console Server user guide 183