Black Box 16 port, 24 port manual Add trap, Add user, Add Wins, 147

add trap

user level: Use this command to define communities which will receive trap messages generated

admin by the unit. Note that the unit does not generate any enterprise-specific traps. Up to four trap comunities may be defined.

Syntax add trap trap_name inetaddress

Where:

trap_name is an arbitrary name assigned to the community.

inetaddress is the internet address that identifies the host(s) in the community.

See also add community, delete trap, set contact, set location, show snmp

add user

user level:	This command enables you to add a new user to the system. You will be prompted to
admin	enter a password (maximum sixteen characters). You must also set the user’s level
Syntax	using the set user command.
	add user username
Menu	Where username is the required login name (maximum sixteen characters).
	Users - Add User
equivalent
See also	delete user, set user, show user

add WINS

user level: This command enables you to define the WINS (Windows Internet Naming Service)

admin host or hosts in your network. You can define a maximum of two hosts. If you wish, it/they can be the same address(es) as a machine(s) already entered in the unit host table.

Syntax add WINS internet_address

Note ‘WINS’ must be entered in upper case. Also:

internet address is the internet address of your machine providing the WINS; enter the address in dot decimal notation.

Menu Network Configuration - WINS - Add WINS equivalent

Black Box Console Server user guide 147