Black Box 16 port, 24 port manual Configuring Snmp support, Add, Delete Community, 205

Configuring SNMP support

To configure for SNMP support proceed as follows;

1.From the Main Menu select ‘network configuration’ and then ‘snmp’.

cli syntax: 2. Select ‘snmp contact information’ to configure the SNMP sysContact and

set contact sysLocation objects; an example screen is shown below: set location

add trap	3. Select ‘edit traps’ to create up to four trap communities; an example screen is
delete trap	shown below:

	SNMP Trap messages generated by the unit will only be broadcast to hosts defined
	by SNMP Trap communities.( note that the unit generates no enterprise specific
add	traps).
	4. Select ‘edit communities’ to create up to four communities; an example screen is
community	shown below:
delete
community

Black Box Console Server user guide 205