Black Box A/S-4 manual ESC or =PF20

CHAPTER 6: Power Up and Configuration Menu Options

6.9.1 PF KEYS

Selection of item B from the menu shown in Figure 9 will cause the menu shown in Figure 10 to be displayed.

If the operator wants to use a different key for PF2, he would first enter the letter “C” and then enter the new value(s) in response to prompt(S) for the new value(s). The key sequences entered for the PF keys must be either control or escape sequences to work properly, and any specific key sequence must be entered for only one key. After a new value has been entered, the menu will be redisplayed and will show the new value(s).

CURRENT:

Application = SDLC/SNA 3274/76 Interactive

VDU = ANSI STD; DEC VT100; Teletype 5410, 5420; Televdeo 970, 960

Keyboard = STANDARD

Change: PF Keys (Keys Typed on VDU to Perform Function)

A-Exit	B-ESC Q or ESC q=PF1
C-ESC W or ESC w=PF2	D-ESC E or ESC e=PF3
E-ESC R or ESC r=PF4	F-ESC T or ESC t=PF5
G-ESC Y or ESC y=PF6	H-ESC U or ESC u=PF7
I-ESC I or ESC i=PF8	J-ESC O or ESC o=PF9
K-ESC P or ESC P=OF10	L-ESC A or ESC a=PF11
M-ESC S or ESC S=PF12	N-ESC D or ESC d=PF13
O-ESC F or ESC f=PF14	P-ESC G or ESC g=PF15
Q-ESC H or ESC h=PF16	R-ESC J or ESC j=PF17
S-ESC K or ESC k=PF18	T-ESC L or ESC l=PF19
U-ESC ; or =PF20	V-ESC Z or ESC z=PF21
W-ESC X or ESC x=Pf22	X-ESC C or ESC c=PF23
Y-ESC V or ESC v=PF24
Enter Letter:
	Figure 10

37