Black Box A/S-4 manual Xon/Xoff=Off

CHAPTER 6: Power Up and Configuration Menu Options

G. PRT LU Addr - By entering a G the operator can select which LU’s data will go to the printer attached to the A/S-4’s terminal port. Selection of this address is done the same as for the VDU LU addr above.

H.PRT LU Type - The printer LU type is changed by entering the letter H which causes the LU type to toggle between type 1 and 3. Type 3 print data is preceded with a Write command followed by a WCC with the start printer bit set. Type 1 data doesn’t have this Write command or WCC in its data.

CURRENT:

Application = SDLC/SNA 3776/77 Batch

VDU = ANSI STD; DEC VT100; Teletype 5410, 5420; Televideo 970,960

Keyboard = STANDARD

Change: Application Options
A-Exit	B-XID=01300FF
C-PU Addr=F7	D-SDLC Baud Rate=1200
E-XON/XOFF=OFF	F-VDU LU Addr=01
G-PRT LU Addr=02	H-Start of File=CTL B
I-End of File=CTL C	J-Send FMH-2 to VDU=NO
K-Precede TRN Ctl Chars	L-Echo Input=YES
with DLE=YES
M-Card Input Data Only=YES
N-VDU Auto Logon Msg=LOGON
APPLID (SYSA) LOGMODE
(BUF512) DATA (RMT13,,,
CTL \ L163AC00CTL \)
O-PRT Auto Logon Field=L163AC01

P-VDU/PRT Auto Signon Msg=/*SIGNON

Enter Letter:

Figure 16

43