Black Box A/S-4 manual Verify Switch Settings

CHAPTER 6: Power Up and Configuration Menu Options

The following is an example of setting the printer for 8 lines per inch.

ESC, 8 - OKI Microline 83A command to set 8 LPI

Printer Options Menu settings:

H-Multiple-(`xxx’ X inches)-xxx=001

K-Start Char-DENSITY=ESC

L-Separator Char-DENSITY=CTL @

M-Final Char-DENSITY=CTL @

ESC,[,90, ,G - GENICOM 3000 command to set 8 LPI

Printer Options Menu Settings:

H-Multiple-(`xxx’ X inches)-xxx=720

K-Start Char-DENSITY=ESC [

L-Separator Char-DENSITY=space

M-Final Char-DENSITY=G

6.13 Verify Switch Settings

To check the settings of the switches used for the terminal’s baud rate, data bits, parity and other selections, enter the letter J in response to the Main Menu. The Verify Switch Settings menu will then be displayed on your screen as in Figure 18.

CURRENT:

Application = SDLC/SNA 3274/76 Interactive

VDU = ANSI STD; DEC VT100; Teletype 5410,5420; Televideo 970,960

Keyboard = STANDARD

Verify Switch Settings

A-Exit

B-Restart With New Switch Options

SWITCH SETTINGS

SW6 (NOs. 07-10)=E

SW7 (NOs. 07-10)=F

SW8 (NOs. 01-08)=FF

SW9 (NOs. 01-08)=0B

Figure 18

49