•press a preset button which has a traf- fic information station allocated to it.
or
b)Switch off the priority for traffic an- nouncements:
•press TA.
“TA” will disappear from the display.
Automatic seek tuning start
(Tape deck and CD changer operation)
If you leave the reception area for the traffic information station you have tuned into while you are playing the tape deck or a CD, the system will automatically start searching for a new TA station.
If no such station is found within approxi- mately 30 seconds, a warning beep will sound every 30 seconds. To switch the warning beep off, proceed as described above.
Tape operation
Inserting a cassette
•Switch on the car radio and release the operating panel by pressing 1.
The operating panel will fold down forwards.
•Insert the cassette with Side A or 1 facing up without the use of force.
The cassette will automatically be transport- ed to its playing position. Cassette playback will begin.
•Grasp the
For safety’s sake, the operating panel must always be returned to the locked position while you are driving.
Switching on tape deck opera- tion
Acassette is inserted,
•Press CC, the cassette functions will appear in the display.
Dolby B NR*
Adjusting the volume for traffic announcements and the warning beep
This volume was preset at the factory, but you can use the DSC function to alter the setting as desired (refer to the section on “DSC programming - VAR, TVOL”).
Removing a cassette
•With the operating panel in the fold- down position, press the Eject button (arrow) briefly.
The cassette will eject.
To prevent damage to the mechanism, do not attempt to stop or force a cassette while it is being inserted or ejected.
This unit can play cassettes which have been recorded with Dolby B NR or without the use of noise suppression.
Cassettes which have been recorded with Dolby B NR* exhibit significantly less tape noise as well as much greater sound dynam- ics.
The Dolby B NR function is active when the red arrow in front of ”DLBY” lights up.
78
