Blaupunkt RCM 169 operating instructions Selecting a 12 or 24-hour mode, Synchronisation

Clock - Time DSA – Digital Sound Adjustment

Selecting a 12 or 24-hour mode

You can choose whether the time is dis- played in a 12 or 24-hour mode.

If necessary, refer to the section on “DSC programming - CLK, MODE”.

Use DSA to activate and adjust the equaliz- er functions and to perform DNC (dynamic noise covering). This allows you to adjust the sound of your car hi-fi system ideally to the listening conditions in the interior of your car.

Synchronisation

To improve the accuracy of the internal clock, it can be synchronised on a regular basis. This is only possible when the time is received via an RDS-CT signal and the au- tomatic synchronisation feature is switched on (default setting).

If the RDS-CT signal is not available, the audio system will attempt to receive the DCF-77 time signal (atomic clock) to cor- rect the time the next time it is switched off.

An overview of the equalizer functions

In-car hi-fi sound is affected by such things as the car interior (cushioning, windows), position of the speakers, etc.

You can use the integrated equalizer to store three different equalizer settings each for the right and left channel (EQ1 - EQ3).

Seven frequency bands can be adjusted per channel.

Activating the equalizer settings	DEUTSCH
You can activate the equalizer settings in
the DSA menu.	ENGLISH
	FRANÇAIS
• Press DSA and EQ one after the other.
	ITALIANO
	NEDERLANDS

The display will indicate “CLK Sync” while it	These settings can be made automatically
is synchronising the time.	using the hi-fi self-adjustment feature or
If you would like to switch off the synchroni-	manually.
sation feature, refer to “DSC programming -	The automatic settings can also be adjust-
CLK, SYNC”.	ed manually.
	In addition, there are five pre-set equalizer
	settings which cannot be altered.

The setting selected last will appear in the
top line of the display.	SVENSKA
“EQ1”, “EQ2”, “EQ3” or
“ROCK”, “POP”, “JAZZ”, “CLASSIC”,
“VOCAL”.
The DOT display will indicate the frequency	ESPAÑOL
band settings for the left or right channel for
this equalizer setting.
The “EQ1 - EQ3” settings can be selected
automatically with the hi-fi self-adjustment	PORTUGUÊS
feature and/or set manually. If necessary,

85