CD changer operation | Clock - Time |
|
|
To delete the name of one CD
•press CD for approx. 1 sec.
“CD clr” will appear briefly in the top line of the display.
To delete the names for all of the CDs
•press ALL for approx. 4 sec.
“Memo clr” will appear briefly in the top line of the display.
To return to the DSC menu:
•Press EXIT.
Press EXIT or DSC to quit the DSC menu.
This car audio system is equipped with a
For the clock to function properly with RDS, an RDS station with the CT function (CT - clock time) must be received.
If this signal is not available, the audio sys- tem will attempt to receive the
The automatic time correction feature can be switched off.
Displaying the clock
You can set the clock to permanent display in any of the operating modes (radio, tape deck, CD changer).
To do so
•Press TU, CC or CDC to select the operating mode.
•Press DIS repeatedly until the time ap- pears in the top line of the display.
The clock will now appear in the display as the main element.
Clock display when the audio system is switched off
You can have the clock displayed when the ignition is switched on, but the audio sys- tem is switched off. Make the correspond- ing setting in the DSC menu.
If necessary, refer to the section on “DSC programming - CLK, VIEW”.
Setting the clock
a)automatically
The clock is set automatically when the radio is tuned into an RDS station which has the “CT” function (clock time).
b)manually with DSC-CLK
It is not necessary to adjust the clock manually unless it is not possible to re- ceive an RDS radio station with CT (Clocktime).
If you would like to set the clock manu- ally, refer to the section on “DSC pro- gramming - CLK, SET”.
84
