KeyCard theft protection system
This car radio comes equipped with one KeyCard, but it can also be operated with a second card.
If you have lost your KeyCard or if it was damaged, you can buy a replacement Key- Card from your specialised dealer.
If you use two KeyCards, the settings stored on the first card will be transferred to the second. However, you can individually store the following functions:
Preset button assignments, bass, treble, balance and fader settings, Loudness, TA (traffic announcement volume), beep vol- ume, LOW and HIGH (equalizer settings).
In addition, the settings activated before the radio is switched off, such as the waveband, station, TA priority, AF, REG on/off, SCAN (time), seek tuning sensitivity, VOL (Power-
Operating the unit for the first time
To insert the KeyCard, unlock the operating panel by
•pressing 1, the operating panel will fold down.
•Insert the KeyCard with the contacts facing down as shown in the illustra- tion (arrow 1).
2
1
3
Removing the KeyCard
To unlock the operating panel:
•Press 1, the operating panel will fold down forwards.
•Push the card to the right as far as possible and remove it to the front.
•Push the operating panel back into po- sition.
For safety’s sake, the operating panel must remain locked when the vehicle is in motion. When you leave the vehicle, unlock the panel and remove the KeyCard to protect the equipment against theft.
On volume) and SHARX will also remained stored.
This ensures that you will find your basic settings
•Push the card in the direction of the ar- row (2) and lock the operating panel back into position (arrow 3).
•Turn on the set with ON.
The car radio is now ready for operation.
Incorrect KeyCard
If a wrong KeyCard is inserted, then “Wrong KC” will appear in the display.
Remove the wrong card and insert the cor- rect KeyCard.
64
