First-time installation
If you would like to alter the entry in a spe- cific line,
•press NEXT as often as required. To complete your entry,
•press ENT.
Switching the ignition connec- tion on/off
Use IGN (ignition) to be able to switch the car radio on and off with the ON button only or with the ignition as well.
Switching on/off:
Connecting external equipment
If external equipment is connected, you have to switch AUX to on. The default setting for AUX is off.
AUX will not appear as a menu item if a Blau- punkt CD changer has been connected.
If the unit is switched on without the Key- Card, this owner ID information will appear in the top line of the display for approximately 8 sec.
Reset to default settings
“NORM (set)” will reset any settings you have altered!
Exception: The stations stored on the sta- tion presets will remain stored.
If you would like to reset to the default set- tings,
•press NORM and then press ENT for approx. 2 sec.
•Press IGN, “Ign on” or “Ign off” will ap-
pear in the top line of the display. | Closing the INSTALL menu | |
• Use << / >> to switch on to off or off to | • Press EXIT. | |
on. | ||
| ||
• Press ENT to store this setting and re- |
| |
| ||
| ||
turn to the INSTALL menu. |
| |
Switching the internal output |
| |
stage on/off |
| |
Use AMP (amplifier) to switch the internal |
| |
output stage on or off. If an additional am- |
| |
plifier has been connected and only the |
| |
preamp outputs are being used, it is a good |
| |
idea to switch the internal amplifier off. |
| |
Switching on/off: |
|
•Press AMP, “Amp on” or “Amp off” will appear in the top line of the display.
•Use << / >> to switch this setting to on or off.
•Press ENT to store the new setting and return to the INSTALL menu.
68
